 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converter TSI-10 Series Features Step-down Switching Regulator with very high Efficiency (> 92%) 1.8 - 3.3 VDC or 5.0 VDC Output, up to 2.0 A Remote ON/OFF Overload Protection Low Output Noise Standby Current only 100 A Small SIL-, DIP- or SMD-Package 2 Year Product Warranty 10 Watt This new generation of step-down converters provides designers with a cost-effective solution for converting a 5 VDC resp. 12 VDC voltage down to 1.8 - 3.3 VDC or to 5 VDC. To achieve highest efficiency, these dc/dc converters are using newest technologies , as amorphous ferrite, solid aluminum capacitors and a synchronous commutation IC. The TSI-10 series needs no further external components to operate within its specifications. A very high efficiency allows operation without additional heatsink. This product finds many applications in distributed powersystems where voltage conversion at the point of load is an advantage. Models Ordercode TSI-3.3S2R0M TSI-3.3S2R0FM TSI-3.3S2R0SM TSI-5.0S2R0M TSI-5.0S2R0FM TSI-5.0S2R0SM Input voltage range Output voltage Output current max. Efficiency typ. Package SIP DIP SMD SIP DIP SMD 4.75 - 13.6 VDC * + 3.3 VDC 2000 mA 92.0 % 6.0 - 16.5 VDC ** + 5.0 VDC 2000 mA 93.0 % * Output adjustable 1.8 to 3.3 VDC ** Output adjustable 3.0 to 5.0 VDC www.tracopower.com Page 1 DC/DC Converter TSI-10 Series 10 Watt Input Specifications Input current (no load) all models Input current (at full load) TSI-3.3S2 models TSI-5.0S2 models Stand-by current 2 mA max. 1410 mA max. (5 Vin) 890 mA max. (12 Vin) 100 A max. Output Specifications Voltage adjustment TSI-3.3S2 models TSI-5.0S2 models +1.8 VDC to +3.3 VDC +3.0 VDC to +5.0 VDC 0.5 % < 1.5 % 50 mVpk-pk max. 50% Load change: Vout over-/undershoot: 50% Load change: Vout over-/undershoot: 0.01 % / C constant current >105% ON=Pin 1 (ON/OFF Pin) to pin 3 (GND) open OFF=Pin 1 (ON/OFF Pin) to pin 3 (GND) short 100 sec typ. 70 mV typ. 100 sec typ. 80 mV typ. Regulation - Input variation - Load variation 0 - 100 % Ripple and noise (20 MHz Bandwidth) Transient response time TSI-3.3S2 models TSI-5.0S2 models Temperature coefficient Short circuit protection Remote ON/OFF control General Specifications Temperature ranges - Operating - Storage Derating above 50C - 25 C ... +70 C - 25 C ... +85 C 3 % / C 95 % rel H max. >1'000'000 h @ 50 C none 200 kHz typ. (PWM modulation) Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 E) Isolation Input/Output Switching frequency Physical Specifications Vibration Shock Package weight Soldering temperature 5 to 10 Hz amplitude 10 mm pk-pk 10 to 55 Hz acceleration 2 G acceleration 20 G max. time 11 ms 6g max. 235C max. / 10 sec. All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TSI-10 Series 10 Watt Outline Dimensions mm (inches) SIP package DIP package Pin-Out Pin 1 2 3 4 5 6 7 DIP Remote on/off +V Input (Vcc) -V Input (GND) +V Output V Output adj No function No function SIP Remote on/off +V Input (Vcc) -V Input (GND) +V Output V Output adj No pin No pin Specifications can be changed without notice www.tracopower.com Page 3 DC/DC Converter TSI-10 Series 10 Watt Outline Dimensions mm (inches) SMD package Pin-Out Pin 1 2 3 4 5 6 7 SMD Remote on/off +V Input (Vcc) -V Input (GND) +V Output V Output adj No function No function Solder Pad Specifications can be changed without notice www.tracopower.com Page 4 DC/DC Converter TSI-10 Series 10 Watt Connections Normal Connection (Standard) 2 +Vin +Vout 4 + TSI 10 Watt 100F/25V - 1 ON/OFF GND V Adj. 5 2.2F-4.7F/25V 3 Remote ON/OFF Connection 2 +Vin +Vout 4 + TSI 10 Wa tt 1 5 100F/25V - 3 2.2F-4.7F/25V Output Voltage Adjustement Connection 2 +Vin +Vout 4 + = - 100F/25V ON/OFF GND 1 3 V Adj. 5 100F-200F/25V VR1 = Rx * 1200 * (Vo - 1.195) Rx * 1.195 - 1200 * (Vo - 1.195) TSI-3.3SxROx ==> Rx = 2130 Ohm Output Voltage = 1.8 - 3.3VDC TSI-5.0SxROFx ==> Rx = 3840 Ohm Output Voltage = 3.0 - 5.0VDC Vo = adjusted ooutput voltage Specifications can be changed without notice Rev. 10/00 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41-1284 2911 * Fax +41-1201 1168 * e-mail: sales@traco.ch Load C1 TSI 10 Wa tt VR1 C2 Load = C1 ON/OFF GND V Adj. C2 Load = C1 C2 * internet: http://www.tracopower.com Page 5 |
Price & Availability of TSI-10
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |